rotheads.blogg.se - Dell 1235cn software

DELL 1235CN SOFTWARE INSTALL
DELL 1235CN SOFTWARE SOFTWARE

Ensure that the original is face down on the scanner glass or face up in the ADF.

If no defects are on the original, clean the scan unit.

If defects are on the original, press Darkness to lighten the background of your copies.

Use Darkness to darken or lighten the background of the copies. See "Altitude adjustment" on page 20.ĬONDITION Copies are too light or too dark Smears, lines, marks, or spots appears on copies You can set this option through Printer Settings Utility or Printer tab in printer driver's properties. The high altitude may affect the print quality such as loose toner or light imaging. Your printer is probably being used at an altitude of 1,000 m (3,281 ft) or above.

DELL 1235CN SOFTWARE SOFTWARE

Refer to the Software section for details.Īn unknown image repetitively appears on a next few sheets or loose toner, light print, or contamination occurs. To printer properties, click Paper tab, and set type to Thin Paper.

Change the printer option and try again.

Turn over the stack of paper in the tray.Īlso try rotating the paper 180° in the tray.

If the printed paper is curled or paper does not feed into the printer: See "Replacing the toner cartridge" on page 53.

DELL 1235CN SOFTWARE INSTALL

Remove the toner cartridge and install a new one. If horizontally aligned black streaks or smears appear: The paper may not meet paper specifications.You may be printing on the wrong surface of the paper.Because of the composition of transparencies, some character voids are normal. If you are using transparencies, try another.Contact a service representative.Ĭharacter voids are white areas within parts of characters that should be solid black: If the problem persists, the printer may require repair.Remove the toner cartridge and install a new one.The toner cartridge may be defective and need replacing.The toner cartridge may not be installed properly.Also try rotating the paper 180° in the tray. Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray.Įnsure that the paper is loaded properly. Turn over the stack of paper in the tray.Temperature and humidity can cause paper curl. Ensure that the paper is loaded properly.